Hackerspace Nijmegen Wiki - Gebruikersbijdragen [nl]

Events

2026-03-10T17:56:57Z

Jay9: remove 2025 cryptpad

{{#ask: [[Categorie:Event]]
|?Event_Name=Naam
|?Event_DateStart=Datum
|?InfoLocation=Locatie
|format=eventline
|limit=100
|offset=0
|link=all
|sort=Event_DateStart
|order=desc
|headers=show
|searchlabel=... meer resultaten
|timelinesize=300px
|timelineposition=today
|timelinebands=MONTH,YEAR
}}

__FORCETOC__
Om een evenement toe te voegen, maak een nieuwe pagina op basis van [[Template:Event]].
Als dat evenement er daarna niet staat, is de kans groot dat je ook nog even de pagina [https://hackerspacenijmegen.nl/index.php?title=Events&action=purge handmatig moet vernieuwen], vanwege cache.

Wil je op de hoogte blijven van toekomstige evenementen? Join onze [https://lists.hackerspacenijmegen.nl/postorius/lists/ mailinglist].

== Alle evenementen ==
{{#ask:[[Category:Event]]
|?PageName
|?Event_Name
|?Event_DateStart
|?Event_DateEnd
|?Event_Info
|sort=Event_DateStart
|order=desc
|offset=0
|limit=9000
|format=template
|template=EventListView
|default=No events
|link=none
}}

Bestand:14dec-SolderingWorkshop-EN.jpg

2025-12-02T19:00:53Z

Jay9: Jay9 heeft een nieuwe versie van Bestand:14dec-SolderingWorkshop-EN.jpg geüpload

Poster: soldering workshop 14 dec 2025 - English

Soldering workshop 2025

2025-12-02T17:47:39Z

Jay9: layout, added picture and poster

[[Bestand:Kerstboomworkshop.jpg|alt=A picture of a table full of parts. Parts of the Christmas tree soldering kit, LED lights, a soldering iron and some batteries.|miniatuur]]
{{Event
|Name=Soldering workshop 2025
|DateStart=2025-12-14 10:00
|DateEnd=2025-12-14 17:00
|Contact=Jay9
|Info=Learn how to solder, make your own Christmas tree
|InfoLocation=Hackerspace Nijmegen
}}

[[Soldering workshop 2025#English|-- English below --]]

Het is weer tijd voor onze jaarlijkse traditie: kerstbomen solderen!
Tijdens deze workshop leer je solderen en ga je naar huis met een kleine kerstboom met knipperende lampjes.
Zeer geschikt voor beginners, we helpen je graag. Voor iedereen ouder dan 8 jaar, maar kinderen graag begeleid door een volwassene.

De workshop wordt twee keer gegeven: 's ochtends (10:00 - 13:00) of 's middags (14:00 - 17:00).
Er zijn 10 plekken per workshop, graag reserveren via:

https://pretix.eu/HSN/Xmas2025/
Kosten: €10, contant betalen tijdens de workshop
======English======
It's time for our yearly tradition: soldering Christmas trees!
During this workshop you'll learn how to solder and take home your own little Christmas tree with blinking lights.
Beginners very welcome, we're here to help. For everyone above 8 years of age, but children must be accompanied by an adult.

There are two workshops: in the morning (10:00 - 13:00) or afternoon (14:00 - 17:00).
10 spots per workshop. Please reserve your spot via:

https://pretix.eu/HSN/Xmas2025/

Costs: €10, cash during the workshop

[[Bestand:3d-Kerstboom-soldeer-workshop-HSN-wit.jpg|alt=mini kerstboom bestaande uit printplaatjes met leds in de vorm van een kleine kerstboom|miniatuur|383x383px|resultaat van mini kerstboom die bij soldeerworkshop wordt gemaakt.|geen]]
[[Bestand:14dec-SolderingWorkshop-EN.jpg|alt=Poster for the soldering workshop on December 14. All info on the poster is on the event page.|miniatuur|geen]]

Bestand:Kerstboomworkshop.jpg

2025-12-02T17:45:16Z

Jay9:

Solderen tijdens kerstboomworkshop

Bestand:14dec-SolderingWorkshop-EN.jpg

2025-12-02T17:40:02Z

Jay9:

Poster: soldering workshop 14 dec 2025 - English

Soldering workshop 2025

2025-11-22T22:24:55Z

Jay9: fix hyperlink

{{Event
|Name=Soldering workshop 2025
|DateStart=2025-12-14 10:00
|DateEnd=2025-12-14 17:00
|Contact=Jay9
|Info=Learn how to solder, make your own Christmas tree
|InfoLocation=Hackerspace Nijmegen
}}

[[Soldering workshop 2025#English|-- English below --]]

Het is weer tijd voor onze jaarlijkse traditie: kerstbomen solderen!
Tijdens deze workshop leer je solderen en ga je naar huis met een kleine kerstboom met knipperende lampjes.
Zeer geschikt voor beginners, we helpen je graag.

De workshop wordt twee keer gegeven: 's ochtends (10:00 - 13:00) of 's middags (14:00 - 17:00).
Er zijn 10 plekken per workshop, graag reserveren via:
[todo: pretix link]

Kosten: €10, contant betalen tijdens de workshop

====== English ======
It's time for our yearly tradition: soldering Christmas trees!
During this workshop you'll learn how to solder and take home your own little Christmas tree with blinking lights.
Beginners very welcome, we're here to help.

There are two workshops: in the morning (10:00 - 13:00) or afternoon (14:00 - 17:00).
10 spots per workshop. Please reserve your spot via:
[todo: pretix link]

Costs: €10, cash during the workshop

Soldering workshop 2025

2025-11-22T22:16:33Z

Jay9: layout

{{Event
|Name=Soldering workshop 2025
|DateStart=2025-12-14 10:00
|DateEnd=2025-12-14 17:00
|Contact=Jay9
|Info=Learn how to solder, make your own Christmas tree
|InfoLocation=Hackerspace Nijmegen
}}

[[English|-- English below --]]

Het is weer tijd voor onze jaarlijkse traditie: kerstbomen solderen!
Tijdens deze workshop leer je solderen en ga je naar huis met een kleine kerstboom met knipperende lampjes.
Zeer geschikt voor beginners, we helpen je graag.

De workshop wordt twee keer gegeven: 's ochtends (10:00 - 13:00) of 's middags (14:00 - 17:00).
Er zijn 10 plekken per workshop, graag reserveren via:
[todo: pretix link]

Kosten: €10, contant betalen tijdens de workshop

====== English ======
It's time for our yearly tradition: soldering Christmas trees!
During this workshop you'll learn how to solder and take home your own little Christmas tree with blinking lights.
Beginners very welcome, we're here to help.

There are two workshops: in the morning (10:00 - 13:00) or afternoon (14:00 - 17:00).
10 spots per workshop. Please reserve your spot via:
[todo: pretix link]

Costs: €10, cash during the workshop

Soldering workshop 2025

2025-11-22T22:15:08Z

Jay9: init

{{Event
|Name=Soldering workshop 2025
|DateStart=2025-12-14 10:00
|DateEnd=2025-12-14 17:00
|Contact=Jay9
|Info=Learn how to solder, make your own Christmas tree
|InfoLocation=Hackerspace Nijmegen
}}

-- English below --

Het is weer tijd voor onze jaarlijkse traditie: kerstbomen solderen!
Tijdens deze workshop leer je solderen en ga je naar huis met een kleine kerstboom met knipperende lampjes.
Zeer geschikt voor beginners, we helpen je graag.

De workshop wordt twee keer gegeven: 's ochtends (10:00 - 13:00) of 's middags (14:00 - 17:00).
Er zijn 10 plekken per workshop, graag reserveren via:
[todo: pretix link]

Kosten: €10, contant betalen tijdens de workshop

----

It's time for our yearly tradition: soldering Christmas trees!
During this workshop you'll learn how to solder and take home your own little Christmas tree with blinking lights.
Beginners very welcome, we're here to help.

There are two workshops: in the morning (10:00 - 13:00) or afternoon (14:00 - 17:00).
10 spots per workshop. Please reserve your spot via:
[todo: pretix link]

Costs: €10, cash during the workshop

The Migration to Post-Quantum Cryptography

2025-11-01T10:29:44Z

Jay9: add info

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

'''Information'''

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

Language: English

Open event, non-members welcome

[[Bestand:The Migration to Post-Quantum Cryptography.jpg|alt=A poster with the most important information about the event 'The Migration to Post-Quantum Cryptography' on 14 November 2025 at Hackerspace Nijmegen. All information from the poster (and more) is also written on this event page.|links|kaderloos|849x849px]]

The Migration to Post-Quantum Cryptography

2025-10-27T15:28:46Z

Jay9: image size

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

'''Information'''

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

Language: English

[[Bestand:The Migration to Post-Quantum Cryptography.jpg|alt=A poster with the most important information about the event 'The Migration to Post-Quantum Cryptography' on 14 November 2025 at Hackerspace Nijmegen. All information from the poster (and more) is also written on this event page.|links|kaderloos|849x849px]]

The Migration to Post-Quantum Cryptography

2025-10-27T15:27:55Z

Jay9: layout

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

'''Information'''

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

Language: English

[[Bestand:The Migration to Post-Quantum Cryptography.jpg|alt=A poster with the most important information about the event 'The Migration to Post-Quantum Cryptography' on 14 November 2025 at Hackerspace Nijmegen. All information from the poster (and more) is also written on this event page.|links|kaderloos]]

The Migration to Post-Quantum Cryptography

2025-10-27T15:25:29Z

Jay9: add image: poster

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

Language: English

[[Bestand:The Migration to Post-Quantum Cryptography.jpg|alt=A poster with the most important information about the event 'The Migration to Post-Quantum Cryptography' on 14 November 2025 at Hackerspace Nijmegen. All information from the poster (and more) is also written on this event page.|links]]

Bestand:The Migration to Post-Quantum Cryptography.jpg

2025-10-27T15:23:02Z

Jay9:

A poster with the most important information about the event 'The Migration to Post-Quantum Cryptography' on 14 November 2025 at Hackerspace Nijmegen. All information from the poster (and more) is also written on this event page.

The Migration to Post-Quantum Cryptography

2025-10-21T10:05:30Z

Jay9:

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

Language: English

The Migration to Post-Quantum Cryptography

2025-10-13T18:06:08Z

Jay9: add info

{{Event
|Name=The Migration to Post-Quantum Cryptography
|DateStart=2025-11-14 20:00
|DateEnd=2025-11-14 22:00
|Contact=Jay9
|Info=A talk about The Migration to Post-Quantum Cryptography by Prof. Dr. Peter Schwabe
|InfoLocation=Hackerspace Nijmegen
}}

Future large universal quantum computers come with many promises and have the potential to enable breakthroughs in multiple areas of science and technology. However, these advances come with one very notable collateral damage, namely that quantum computers will also be able to break cryptographic schemes whose security relies on the hardness of integer factorization or discrete logarithms. Such cryptographic schemes are currently a critical part of the security foundation of our digital society. In my talk I will give an overview of ongoing efforts to mitigate this threat by migrating our cryptographic infrastructure to schemes that are believed to resist attacks even by large universal quantum computers. Multiple such so-called "post-quantum" cryptographic schemes have recently been standardized and we are already using them every day, typically without even noticing that we do. Yet, there are still major efforts required to migrate *all* of our infrastructure to this next generation of cryptography.

'''About Prof. Dr. Peter Schwabe'''

Peter Schwabe is scientific director at MPI-SP and professor at Radboud University. He graduated from RWTH Aachen University in computer science in 2006 and received a Ph.D. from the Faculty of Mathematics and Computer Science of Eindhoven University of Technology in 2011. He then worked as a postdoctoral researcher at the Institute for Information Science and the Research Center for Information Technology Innovation of Academia Sinica, Taiwan and at National Taiwan University. His research area is cryptographic engineering; in particular the security and performance of cryptographic software. He published more than 80 articles in journals and at international conferences presenting, for example, fast software for a variety of cryptographic primitives including AES, hash functions, elliptic-curve cryptography, and cryptographic pairings. He has also published articles on fast cryptanalysis, in particular attacks on the discrete-logarithm problem. In recent years he has focused in particular on post-quantum cryptography. He co-authored the "NewHope" and "NTRU-HRSS" lattice-based key-encapsulation schemes which were used in post-quantum TLS experiments by Google and he is co-submitter of seven proposals to the NIST post-quantum crypto project, all of which made it to the second round, five of which made it to the third round, and 3 of which were selected after round 3 for standardization. In 2021, he co-founded the Formosa-Crypto project, an effort by multiple research groups to build (post-quantum) cryptographic software with formal proofs of functional correctness and security.

Date: 14 November 2025, 20:00

Location: Hackerspace Nijmegen, Villanovastraat 4, Nijmegen

Entrance: free

The Migration to Post-Quantum Cryptography

2025-10-13T16:57:25Z

Jay9: first draft

WHY watch party

2025-09-02T20:41:04Z

Jay9: practical info

{{Event
|Name=WHY watch party
|DateStart=2025-09-12 20:00
|DateEnd=2025-09-12 23:59
|Contact=Jay9
|Info=Watching back the WHY talks we missed
|InfoLocation=Hackerspace Nijmegen
}}
We all know you planned to go see these awesome talks at WHY2025, but we also know that you were still at the other side of the field when the talk already ended. Luckily, they recorded most of the talks and they are published for watching them back!

This night we'll come together to watch some of the best talks we missed. Everyone can bring a list of talks they want to see, and we'll discuss with everyone present which talks will be scheduled for the night.

All talks can be found here: https://media.ccc.de/c/WHY2025

Friday September 12, 20:00 until late

Open for everyone: members, non members, WHY2025 visitors, non visitors

Free entrance

Villanovastraat 4, 6542JA Nijmegen

WHY watch party

2025-09-02T20:37:18Z

Jay9:

WHY watch party

2025-09-02T20:30:58Z

Jay9: add info

{{Event
|Name=WHY watch party
|DateStart=2025-09-12 20:00
|DateEnd=2025-09-12 24:00
|Contact=Jay9
|Info=Watching back the WHY talks we missed
|InfoLocation=Hackerspace Nijmegen
}}
We all know you planned to go see these awesome talks at WHY2025, but we also know that you were still at the other side of the field when the talk already ended. Luckily, they recorded most of the talks and they are published for watching them back!

This night we'll come together to watch some of the best talks we missed. Everyone can bring a list of talks they want to see, and we'll discuss with everyone present which talks will be scheduled for the night.

All talks can be found here: https://media.ccc.de/c/WHY2025

WHY watch party

2025-09-02T20:20:40Z

Jay9: initial commit

{{Event
|Name=WHY watch party
|DateStart=2025-09-12 20:00
|DateEnd=2025-09-12 24:00
|Contact=Jay9
|Info=Watching back the WHY talks we missed
|InfoLocation=Hackerspace Nijmegen
}}

Tool:BambuLab P1S (3D printer)

2025-07-22T21:00:30Z

Jay9: correct price

We have a BambuLab P1S 3D printer.
We have a 0.4 mm nozzle, different PET-G and PLA filaments, a Bambu Textured PEI plate and Bambu Smooth PEI plate.

=== Software ===
To use this printer, you need the Bambu Studio software. This can be downloaded here:
https://bambulab.com/en-eu/download/studio (free, Windows and Mac only)
You need to create a (free) account, and log in.
Then, connect to the BambuWifi. Ask someone for the password.
When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer.

=== Set up project ===
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer.

=== After printing ===
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing.

=== Costs ===
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,03 per gram. You can transfer the costs to the account `3d-printer` on RevBank.

Tool:BambuLab P1S (3D printer)

2025-06-19T17:29:23Z

Jay9: add plate

We have a BambuLab P1S 3D printer.
We have a 0.4 mm nozzle, different PET-G and PLA filaments, a Bambu Textured PEI plate and Bambu Smooth PEI plate.

=== Software ===
To use this printer, you need the Bambu Studio software. This can be downloaded here:
https://bambulab.com/en-eu/download/studio (free, Windows and Mac only)
You need to create a (free) account, and log in.
Then, connect to the BambuWifi. Ask someone for the password.
When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer.

=== Set up project ===
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer.

=== After printing ===
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing.

=== Costs ===
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank.

Tool:BambuLab P1S (3D printer)

2025-06-19T08:33:42Z

Jay9: layout

We have a BambuLab P1S 3D printer.
We have a 0.4 mm nozzle, different PET-G and PLA filaments, and a Bambu Textured PEI plate.

=== Software ===
To use this printer, you need the Bambu Studio software. This can be downloaded here:
https://bambulab.com/en-eu/download/studio (free, Windows and Mac only)
You need to create a (free) account, and log in.
Then, connect to the BambuWifi. Ask someone for the password.
When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer.

=== Set up project ===
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer.

=== After printing ===
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing.

=== Costs ===
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank.

Tool:BambuLab P1S (3D printer)

2025-06-19T08:32:17Z

Jay9: first draft

We have a BambuLab P1S 3D printer.
We have a 0.4 mm nozzle, different PET-G and PLA filaments, and a Bambu Textured PEI plate.

# software
To use this printer, you need the Bambu Studio software. This can be downloaded here:
https://bambulab.com/en-eu/download/studio (free, Windows and Mac only)
You need to create a (free) account, and log in.
Then, connect to the BambuWifi. Ask someone for the password.
When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer.

# set up project
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer.

# after printing
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing.

# costs
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank.

Lilka

2025-06-12T16:36:28Z

Jay9: SD card > micro SD card

українською нижче

[[Bestand:Lilka render Doom.png|alt=A render of the Lilka console with Doom on the display|geen|miniatuur]]

Lilka is an open source gaming console, developed in Ukraine. [https://lilka.dev/ lilka.dev]

You can build this console yourself, play games on it, write your own programs, and connect it to other hardware.

One of our Ukrainian friends, Andriy Utkin, sponsored our Lilka soldering kits. Therefore we can host free soldering workshops for Ukrainian people.

During the workshop, we will solder one Lilka each, from begin to end. We will learn you how to solder, and instructors are available to guide you through the steps. In the end, you will have your own Lilka to play games, learn how to program, and experiment with hardware. In order to install games on your Lilka, please bring a micro SD card of at least 8 GB.

This is a 1-day workshop. If you want to continue soldering, programming or tinkering, you are very welcome to come by at the hackerspace during opening hours! We repeat this workshop multiple times, so if after the workshop you meet people that want to build their own Lilka, they can attend one of the other dates or send us an email.

[[Bestand:Lilka-diy.jpg|miniatuur|alt=someone putting a Lilka kit together]]Workshop dates:

- 14 juni 10:00 - 16:00

- 20 juli 10:00 - 16:00

More information about Lilka:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

The workshop is free, we have 10 spots per workshop. Please register your spot here:

https://pretix.eu/HSN/Lilka-juni2025/

If you need more help after the workshop, or want to continue soldering, building and tinkering, feel free to come by during our opening hours.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Thanks to our sponsor:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

----

Лілка - це ігрова приставка з відкритим вихідним кодом, розроблена в Україні. [https://lilka.dev/ lilka.dev]

Ви можете самостійно зібрати цю приставку, грати на ній в ігри, писати власні програми та під'єднувати її до іншого обладнання.

Один з наших українських друзів, Андрій Уткін, спонсорував наші набори для пайки Лілок. Тому ми можемо проводити безкоштовні майстер-класи з пайки для українців.

Під час воркшопу ми спаяємо по одній Лілці від початку до кінця. Ми навчимо вас паяти, а інструктори проведуть вас через усі етапи. В результаті ви матимете власну Лілка, щоб грати в ігри, вчитися програмувати та експериментувати з апаратним забезпеченням. Для того, щоб встановити ігри на Lilka, будь ласка, візьміть з собою карту пам'яті micro SD об'ємом не менше 8 ГБ.

Це 1-денний воркшоп. Якщо ви хочете продовжити паяти або програмувати, ласкаво просимо завітати до хакерспейсу в робочі години! Ми повторюємо цей воркшоп кілька разів, тож якщо після воркшопу ви зустрінете людей, які хочуть зібрати власну Лілка, вони можуть прийти на один з наступних воркшопів або написати нам на електронну пошту.[[Bestand:Lilka soldering.jpg|alt=Someone soldering components on the Lilka|miniatuur]]Дати майстер-класів:

- 14 червня 10:00 - 16:00

- 20 липня 10:00 - 16:00

Більше інформації про Лілку:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

Участь у воркшопі безкоштовна, у нас є 10 місць на воркшоп. Будь ласка, зареєструйте своє місце тут:

https://pretix.eu/HSN/Lilka-juni2025/

Якщо вам потрібна додаткова допомога після майстер-класу або ви хочете продовжити паяння та програмування, приходьте до нас у робочий час.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Дякуємо нашому спонсору:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

Lilka

2025-06-12T14:09:09Z

Jay9: more info on the program

українською нижче

[[Bestand:Lilka render Doom.png|alt=A render of the Lilka console with Doom on the display|geen|miniatuur]]

Lilka is an open source gaming console, developed in Ukraine. [https://lilka.dev/ lilka.dev]

You can build this console yourself, play games on it, write your own programs, and connect it to other hardware.

One of our Ukrainian friends, Andriy Utkin, sponsored our Lilka soldering kits. Therefore we can host free soldering workshops for Ukrainian people.

During the workshop, we will solder one Lilka each, from begin to end. We will learn you how to solder, and instructors are available to guide you through the steps. In the end, you will have your own Lilka to play games, learn how to program, and experiment with hardware. In order to install games on your Lilka, please bring an SD card of at least 8 GB.

This is a 1-day workshop. If you want to continue soldering, programming or tinkering, you are very welcome to come by at the hackerspace during opening hours! We repeat this workshop multiple times, so if after the workshop you meet people that want to build their own Lilka, they can attend one of the other dates or send us an email.

[[Bestand:Lilka-diy.jpg|miniatuur|alt=someone putting a Lilka kit together]]Workshop dates:

- 14 juni 10:00 - 16:00

- 20 juli 10:00 - 16:00

More information about Lilka:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

The workshop is free, we have 10 spots per workshop. Please register your spot here:

https://pretix.eu/HSN/Lilka-juni2025/

If you need more help after the workshop, or want to continue soldering, building and tinkering, feel free to come by during our opening hours.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Thanks to our sponsor:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

----

Лілка - це ігрова приставка з відкритим вихідним кодом, розроблена в Україні. [https://lilka.dev/ lilka.dev]

Ви можете самостійно зібрати цю приставку, грати на ній в ігри, писати власні програми та під'єднувати її до іншого обладнання.

Один з наших українських друзів, Андрій Уткін, спонсорував наші набори для пайки Лілок. Тому ми можемо проводити безкоштовні майстер-класи з пайки для українців.

Під час воркшопу ми спаяємо по одній Лілці від початку до кінця. Ми навчимо вас паяти, а інструктори проведуть вас через усі етапи. В результаті ви матимете власну Лілка, щоб грати в ігри, вчитися програмувати та експериментувати з апаратним забезпеченням. Для того, щоб встановити ігри на вашу Лілку, будь ласка, візьміть із собою SD-карту пам'яті не менше 8 ГБ.

Це 1-денний воркшоп. Якщо ви хочете продовжити паяти або програмувати, ласкаво просимо завітати до хакерспейсу в робочі години! Ми повторюємо цей воркшоп кілька разів, тож якщо після воркшопу ви зустрінете людей, які хочуть зібрати власну Лілка, вони можуть прийти на один з наступних воркшопів або написати нам на електронну пошту.[[Bestand:Lilka soldering.jpg|alt=Someone soldering components on the Lilka|miniatuur]]Дати майстер-класів:

- 14 червня 10:00 - 16:00

- 20 липня 10:00 - 16:00

Більше інформації про Лілку:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

Участь у воркшопі безкоштовна, у нас є 10 місць на воркшоп. Будь ласка, зареєструйте своє місце тут:

https://pretix.eu/HSN/Lilka-juni2025/

Якщо вам потрібна додаткова допомога після майстер-класу або ви хочете продовжити паяння та програмування, приходьте до нас у робочий час.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Дякуємо нашому спонсору:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

Projects:Meshtastic

2025-06-10T21:48:35Z

Jay9: update status

Hackerspace Nijmegen has a Meshtastic node. It is configured to connect to the space WiFi.

The goal is to have a node that prints all received messages to a display in the hackerspace.

Status: node should be 24/7 online with the name 'Hackerspace Nijmegen', or short 'HSN'.
We can succesfully read incoming messages with a python script on a machine on the same WiFi network, but don't do this continuously yet.

==Specs:==
Hardware: Heltec Vision Master E290

==//TODO:==

*run https://github.com/brad28b/meshtastic-cli-receive-text on a RPi or the server, and output incoming messages to the screen
//DONE

*update to the latest firmware
*swap battery for power supply
*set static IP (via DHCP, Router always supplies same IP: http://10.138.66.187/)
*place on the highest possible point in the building

==Useful links:==
https://meshtastic.org/docs/software/python/cli/usage/

https://client.meshtastic.org/

==Hackers involved:==
Voorstad, Jay9

Projects:Meshtastic

2025-06-03T21:40:13Z

Jay9: initial commit

Hackerspace Nijmegen has a Meshtastic node. It is configured to connect to the space WiFi.

The goal is to have a node that prints all received messages to a display in the hackerspace.

Status: node itself is working but not 24/7 powered. Succesfully read incoming messages with a python script on a machine on the same WiFi network.

==Specs:==
Hardware: Heltec Vision Master E290

==//TODO:==

*update to the latest firmware
*swap battery for power supply
*put it on the roof in a waterproof box
*set static IP
*run https://github.com/brad28b/meshtastic-cli-receive-text on a RPi or the server, and output incoming messages to the screen

==Useful links:==
https://meshtastic.org/docs/software/python/cli/usage/

https://client.meshtastic.org/

==Hackers involved:==
Voorstad, Jay9

Lilka

2025-06-02T21:44:53Z

Jay9: add pretix link

Lilka

2025-06-02T11:39:32Z

Jay9: info on pretix link

Lilka

2025-06-02T10:53:04Z

Jay9: adjusting timeslots

Lilka

2025-06-01T22:19:47Z

Jay9: add picture

Lilka

2025-06-01T21:35:20Z

Jay9: grammatical corrections

Bestand:Lilka soldering.jpg

2025-06-01T21:17:44Z

Jay9:

Soldering a part of the Lilka

Lilka

2025-06-01T20:47:20Z

Jay9: add time

Lilka

2025-06-01T20:38:04Z

Jay9:

Lilka

2025-06-01T20:35:47Z

Jay9:

Lilka

2025-06-01T20:35:17Z

Jay9:

Bestand:Lilka render Doom.png

2025-06-01T20:34:09Z

Jay9:

Lilka console render with Doom

Lilka

2025-06-01T20:32:53Z

Jay9:

українською нижче

Lilka is an open source gaming console, developed in Ukraine. [https://lilka.dev/ lilka.dev]

You can build this console yourself, play games on it, write your own programs, and connect it to other hardware.

One of our Ukrainian friends, Andriy Utkin, sponsored our Lilka soldering kits. Therefore we can host free soldering workshops for Ukrainian people.

[[Bestand:Lilka-diy.jpg|miniatuur|alt=someone putting a Lilka kit together]]Workshop dates:

- 14 juni

- 20 juli

More information about Lilka:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

The workshop is free, we have 10 spots per workshop. Please register your spot here:

[pretix link]

If you need more help after the workshop, or want to continue soldering, building and hacking, feel free to come by during our opening hours.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Thanks to our sponsor:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

----Лілка - це ігрова приставка з відкритим вихідним кодом, розроблена в Україні. [https://lilka.dev/ lilka.dev]

Ви можете самостійно зібрати цю приставку, грати на ній в ігри, писати власні програми та під'єднувати її до іншого обладнання.

Один з наших українських друзів, Андрій Уткін, спонсорував наші набори для пайки Лілка. Тому ми можемо проводити безкоштовні майстер-класи з пайки для українців.

Дати майстер-класів:

- 14 червня

- 20 липня

Більше інформації про Лілка:

https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

[https://autkin.net/lilka/ autkin.net/lilka]

https://dou.ua/forums/topic/52637/

Участь у воркшопі безкоштовна, у нас є 10 місць на воркшоп. Будь ласка, зареєструйте своє місце тут:

[pretix link]

Якщо вам потрібна додаткова допомога після воркшопу, або ви хочете продовжити паяти, збирати та хакерствувати, приходьте до нас в робочі години.

[[Bestand:Andriy Utkin.png|alt=low-res portrait of Andriy Utkin|links|miniatuur|124x124px]]

Дякуємо нашому спонсору:

'''Andriy Utkin'''

[http://autkin.net/ autkin.net]

Lilka

2025-06-01T20:32:29Z

Jay9:

Lilka

2025-06-01T20:31:56Z

Jay9: extra info and Ukrainian translation

Bestand:Andriy Utkin.png

2025-06-01T20:19:29Z

Jay9:

low-res portrait of Andriy Utkin

Lilka

2025-06-01T20:00:44Z

Jay9: adding links

Lilka is an open source gaming console, developed in Ukraine. https://lilka.dev/

One of our Ukrainian friends sponsored Lilka soldering kits, therefor we can host free soldering workshops for Ukrainian people. https://autkin.net/lilka/

Workshop dates:

- 14 juni

- 20 juli

[[Bestand:Lilka-diy.jpg|miniatuur]]https://www.youtube.com/watch?v=OZc5GKi1VZ8

https://www.youtube.com/watch?v=PeXYxCSI9n0

https://dou.ua/forums/topic/52637/

Lilka

2025-06-01T19:56:18Z

Jay9: date change

Lilka is an open source gaming console, developed in Ukraine.

One of our Ukrainian friends sponsored Lilka soldering kits, therefor we can host free soldering workshops for Ukrainian people.

Workshop dates:

- 14 juni

- 20 juli

[[Bestand:Lilka-diy.jpg|miniatuur]]

Lilka

2025-06-01T19:40:22Z

Jay9:

Bestand:Lilka-diy.jpg

2025-06-01T19:40:11Z

Jay9:

Someone putting a Lilka together

Lilka

2025-06-01T19:34:51Z

Jay9: init

Ctrl+Alt+Dance

2025-05-18T13:29:35Z

Jay9:

{{Event
|Name=Ctrl+Alt+Dance
|DateStart=2025-06-23 20:00
|DateEnd=2025-06-23 24:00
|Contact=
|Info=
}}

Dance Dance Revolution and Stepmania in the house!

For those of us that don't know how to dance: don't worry! The game tells you how to move. And you sure know games, don't you? This is your yearly mandatory dance lesson. Your attendance is expected!

PS. bring your friends🕺💃

[[Bestand:Ctrl+Alt+Dance flyer.jpg|miniatuur]]
May 23rd (Friday), 20:00 - late

€ free entrance, drinks at the Spacebar.

Villanovastraat 4, Nijmegen

Get in the mood:

https://youtu.be/HAHAOV6mzL4?si=ZpshsV51I7jS9TWM

Ctrl+Alt+Dance

2025-05-13T20:25:21Z

Jay9: