Tool:BambuLab P1S (3D printer): verschil tussen versies
(first draft) |
k (layout) |
||
| Regel 2: | Regel 2: | ||
We have a 0.4 mm nozzle, different PET-G and PLA filaments, and a Bambu Textured PEI plate. | We have a 0.4 mm nozzle, different PET-G and PLA filaments, and a Bambu Textured PEI plate. | ||
=== Software === | |||
To use this printer, you need the Bambu Studio software. This can be downloaded here: | To use this printer, you need the Bambu Studio software. This can be downloaded here: | ||
https://bambulab.com/en-eu/download/studio (free, Windows and Mac only) | https://bambulab.com/en-eu/download/studio (free, Windows and Mac only) | ||
| Regel 9: | Regel 9: | ||
When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer. | When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer. | ||
=== Set up project === | |||
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer. | In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer. | ||
=== After printing === | |||
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing. | The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing. | ||
=== Costs === | |||
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank. | You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank. | ||
Versie van 19 jun 2025 08:33
We have a BambuLab P1S 3D printer. We have a 0.4 mm nozzle, different PET-G and PLA filaments, and a Bambu Textured PEI plate.
Software
To use this printer, you need the Bambu Studio software. This can be downloaded here: https://bambulab.com/en-eu/download/studio (free, Windows and Mac only) You need to create a (free) account, and log in. Then, connect to the BambuWifi. Ask someone for the password. When connected to the BambuWifi, the printer should be shown at the 'Device' tab. Click on the device and it asks you for the access code. This code can be found on the printer itself. Use the arrow keys next to the screen on the printer to navigate to Settings > WLAN > Access Code. Use this access code to connect your pc to the printer.
Set up project
In the 'Prepare' tab, place your 3d file and position it on the plate. Slice it (or click the 'Preview' tab), and you will see the estimated time and other stats. You can now send it to the printer.
After printing
The printer always prints some exess filament on the bottom side of the plate. Please remove this after printing.
Costs
You only pay for the filament. In the 'Preview' tab you see the amount of grams of filament your print will use. The costs are €0,35 per gram. You can transfer the costs to the 3d-printer account on RevBank.